Doral Elevator Jack Replacement Services We Provide
We sell the fix your equipment needs, nothing more. First, we pressure-test the system and inspect the pump and valve, since a tired control valve can mimic a failing cylinder almost perfectly.
Buried Cylinder Replacement
When the cylinder has corroded, cracked, or failed a pressure test, we remove it and install a new one. We set the replacement inside a PVC liner, which keeps the steel away from soil and groundwater and keeps hydraulic oil out of the ground.
Single Bottom to Double Bottom Conversion
A cylinder with one bottom plate has no backup. If it cracks, oil escapes quickly, and the car comes down. We install a double bottom cylinder with a safety bulkhead so a failed plate cannot become a free fall.
Packing and Seal Service
High-cycle freight elevators chew through packing. If the cylinder itself tests sound and oil is only escaping at the top, a packing replacement solves it in a fraction of the time and cost of a dig.
Power Unit and Valve Work
Slow lifts and rough stops often trace back to the power unit, not the jack. We replace the pump unit during the same shutdown so your dock isn’t down twice.
Why Facility Managers Call Us First
We answer the phone, show up the same day, and carry the job through to a passed inspection. A jack replacement involves permits, load testing, and a building that still has to operate, and splitting that across vendors is how schedules fall apart.
- Same-day response. We answer calls and emails the day they come in.
- Licensed techs, 24 hours. Weekends and holidays are covered.
- We handle permits and inspections. We file, we meet the inspector, and we negotiate when a violation is already open.
- We change parts before they break. That is cheaper than an emergency call during a shipping week.
- Every major brand. Otis, Kone, Schindler, and TK.
Warehouse work has its own rhythm. A distribution building near the airport usually cannot lose its freight elevator during a receiving window, so we start late or work weekends to keep the docks moving.
Office buildings around Doral Boulevard are the opposite, and we would rather be in there on a Saturday than during a Tuesday lunch rush.
Our breakdown of hydraulic and traction elevators explains why the hydraulic units common here age the way they do.
Miami-Dade County Permits Your Jack Replacement
Doral does not run its own elevator program. The Miami-Dade County Office of Elevator Safety is the authority for elevators in every municipality in the county except Miami and Miami Beach, and it became part of the Department of Regulatory and Economic Resources on October 1, 2025. Only a licensed contractor can pull an elevator permit, so owners and managers cannot file this one themselves.
A FIJI jack job runs in this order:
- Testing and written scope. We check the cylinder, pump, valve, and oil consumption records, then document the findings.
- Permit. We file with the county Office of Elevator Safety.
- The work. Old jack out, new cylinder and plunger set and aligned.
- Full load test. Florida treats a cylinder swap as an alteration, so the car must carry rated load for an inspector before it reopens.
- Back in service. We release the car and hand you clean records for your maintenance and inspection file.
The county also issues your certificate of operation, which has to be renewed yearly and posted in the car. Inspectors check for it first, and an expired one is a violation in itself.
Does Your Elevator Need a New Jack?
Probably, if the car settles when parked, the oil tank keeps dropping, or the cylinder is an old single-bottom design. An inspection now is far cheaper than an unplanned shutdown.
Red flags to watch:
- Oil being added regularly with no leak anyone can find
- The car sinking below the landing and re-leveling again and again
- A failed pressure test or an inspector note about the cylinder
- Oil or sheen collecting in the pit
Doral ground stays wet. The Northwest Wellfield sits just west of the city, and the South Florida Water Management District manages a shallow aquifer that keeps groundwater close to the surface across this part of the county.
Bare steel sunk into damp, mineral-heavy soil corrodes from the outside in, and nobody sees it happening.
The code may already require this work. Florida mandated corrective action on existing single-wall hydraulic cylinders when it adopted ASME A17.1 back in 2005, and the Florida Bureau of Elevator Safety enforces the current ASME editions under Rule 61C-5.001.
The Bureau also requires immediate replacement of damaged aluminum cylinder heads made by General Elevator Corporation, believed to have been installed between about 1974 and 1982.
If nobody at your building knows what is under the car, our guide to elevator safety rules in Florida explains what the state expects.
How a Service Call Goes
A typical one: a property manager at an office park keeps authorizing oil deliveries, the machine room is bone dry, and the elevator keeps dropping an inch overnight.
They want to know if it is the jack and how long their tenants will be without it.
We come out and test. You get a written scope naming one of three outcomes: a full cylinder, a seal-and-head job, or a fault in the power unit.
Then we plan the outage around your operations:
- Pick dates that miss peak receiving and big tenant moves
- Post notice early for tenants and anyone using a wheelchair or walker
- Schedule the inspector so the car returns the moment it passes
Not everything can wait for a date on a calendar. If the car drops without warning or oil is pooling in the pit, take it out of service and call us.
If anyone is stuck inside, call 911 first, then our emergency repair line. Our guide on what counts as an elevator emergency helps your staff make the right call.